OEM Fiberglass 6.4579.0 Compressor Oil Separator For Kaeser

Oil Separator 6.4579.0 For Kaeser Compressor Air Oil Separator

Life and fault of oil in permanent magnet variable frequency screw air compressor

But the resistance is too large, which increases the power consumption of the air compressor, which is not conducive to energy conservation and emission reduction. So when the oil is blocked to a certain pressure, it must be replaced.

The pressure difference before and after the general oil filter is 0.105 ~ 0.140Mpa. When it is greater than the specified value, it should be replaced in time. The specific replacement time is a total of 50 ~ 150h for the first use and then every 1000 ~ 2000h will need to be replaced.If the air compressor runs for less than the rated time each year, the filter element should also be replaced when the oil is changed.Remove the dirty oil from the oil filter and clean the inside of the filter.When installing the filter element, attention should be paid to check the sealing ring or gasket in the filter to prevent the oil bypass caused by the lax sealing, which makes the filter ineffective.

Features

• Low pressure drop and energy saving
• High quality filtration media
• Low oil consumption
• Reliable and stable
• Compact design
• Long life span

6.4579.0 Compressor Oil Separator

OEM Compressor Oil Separator

Fiberglass Compressor Oil Separator

OEM Fiberglass 6.4579.0 Compressor Oil Separator For Kaeser Images